Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
233 Turnbuckle
AS 3105 1-1/4" One Piece Cable and Conduit Clamp
AS 2408 Wall Ladder Bracket
AS 1000AS EMT Conduit Clamps
AS 665 Four Hole Double Corner Connector
AS 500EHBTB Welded Channel Elongated Holes
114 Turnbuckle Adjuster
AS 200KO Channel with Knock Outs
47 Concrete Single Lug Plate
AS 602 Three Hole Splice Plate
AS 300, AS 300EH, AS 300KO, AS 300H, AS 300S Channel Submittal