Anvil-Strut "Z" Supports are designed to fit with all Anvil-Strut 1-5/8" wide channels. Unless otherwise noted, Anvil-Strut "Z" Supports are manufactured from 1/4" thick carbon steel, 1-5/8" wide, all holes are 9/16" diameter, spaced 1-7/8" on center and 13/16" from the end.
FIG AS711 AS 711 "Z" Support
Figs. AS 2601, AS 611, AS 609, AS 756, AS 3060, AS 612, AS 711, AS 928 Z Support Submittal
AS 3106 1-1/2" One Piece Cable and Conduit Clamp
AS 2601 "Z" Support
AS 913 Ten Hole Two Angle Clevis Connector
AS 3126 Hold Down Clamp
AS 9404 Four Hole Hinge Connector
AS 679 "U" Support
128R Ceiling Flange, Rod Threaded
AS 733 Six Hole "U" Support
284 Metal Deck Hanger
178 Spring Cushion Hanger