Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
FIG AS210H AS 210H Channel with Holes
AS 210, AS 210EH. AS 210KO, AS 210H. AS 210S Channel with Elongated Holes Submittal
271 Pipe Roll Stand
AS 719 Four Hole Corner Plate
76CP Non-Conductive Roller
AS 2144 Corner Angle
AS 927 Four Hole Corner Connector
Fig. 213 No-Hub Restraint
137SS Stainless Steel U-Bolts
AS 871 Safety Anchor Strap
138R Extension Split Pipe Clamp
AS 3102 1/2" One Piece Cable and Conduit Clamp