Anvil-Strut "U" Supports are designed to fit with all Anvil-Strut 1-5/8" wide channels. Unless otherwise noted, Anvil-Strut "U" Supports are manufactured from 1/4" thick carbon steel, 1-5/8" wide, all holes are 9/16" diameter, spaced 1-7/8" on center and 13/16" from the end.
FIG AS2648 AS 2648 "U" Support
AS 2119, AS 678, AS 721, AS 613, AS 679, AS 710, AS 929, AS 978, AS 2648 "U" Connector Submittal
89 Retaining Clip
AS 604 Two Hole Corner Angle
AS 930 Type "A" End Cap
AS LS Clamping Nut with Long Spring
AS 913 Ten Hole Two Angle Clevis Connector
Cable Toggle
AS 520H Channel with Holes
AS 624 Two Hole Closed Angle Connector
HBS-H-Block Supports with Steel Channel
AS 902 Type "A" End Cap