Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
AS 500H Channel with Holes
Loop Clutch
AS 668 Six Hole Three Angle Connector
164 3" Pipe Covering Protection Saddle
Phenolic Shield
AS 806 Two Hole Angle with Impressions on Both Leg
AS 821 Eight Hole Double Angle Connector
AS 613 "U" Support
207 Threaded Steel Side Beam Bracket
Anvil Shields - Universal Shield
AS 400, AS 400EH, AS 400KO, AS 400H, AS400S Channel Submittal