Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
AS 2580 Type "A" End Cap
AS 3112 3-3/4" One Piece Cable and Conduit Clamp
AF086 Adjustable Structural Brace Attachment
AS 825 RH/LH Pipe Axle Support
135E Rod Coupling, Straight w/o Sight Hole
266 Light Duty Two-Hole Pipe Strap
AS 661 T2 Strut Bracket (Slot Down)
AS 652 Type "B" End Cap Anchor
AS 619 Square Washer
261 Extension Pipe or Riser Clamp
AS100, AS100EH, AS 100KO, AS100H, AS100S Channel Submittal