Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
FIG AS150EH AS 150EH Channel with Elongated Holes
AS150, AS150EH. AS150KO, AS150H, AS150S Channel Submittal
AS 3103 3/4" One Piece Cable and Conduit Clamp
432 Special Clamp
AS 2421 45º Stair Tread Support
AS 210KO Channel with Knock Outs
AS 400BTB Welded Channel
AS 1200AS O.D. Tubing Clamp
AS 3025FL Post Base
AS 200KO Channel with Knock Outs
AS 793 Four Hole Closed Angle Connector
AS 209 Flat Washer