Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
FIG AS150H AS 150H Channel with Holes
AS150, AS150EH. AS150KO, AS150H, AS150S Channel Submittal
AS 615 Four Hole Shelf Joint Angle Connector
CT-255 Copper Tubing Alignment Guide
Light Duty Riser Clamp
AS 3033 Post Base
432 Special Clamp
AS 517 Stud Nut with RS Spring
171 Single Pipe Roll
AS 2064 Double Column Post Base
AS 2601 "Z" Support
286 Iron Cross Design - Discontinued