Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
AS 9404 Four Hole Hinge Connector
AS 500 Channel
248L Threaded Eye Rod, Not Welded - LH
AS 718 Flat Angle Plate
AS 230 Fender Washer
AS 763, AS 764 Slotted Adjustment Corner Angle
AS 85 Rod or Insulator Support
Light Duty Two-Hole Pipe Strap
AS 150KO Channel with Knock Outs
Mechanical Snubber PSA 1, 3, 10
AS 400, AS 400EH, AS 400KO, AS 400H, AS400S Channel Submittal