Anvil-Strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.
AS 2654 Column Attachment
HBM-Series Support with Threaded Rod Extension and Channel
AS 927 Four Hole Corner Connector
AS 1902 (1" to 8" Pipe) Pipe Roller Support
AS 520EHBTB Welded Channel Elongated Holes
AS 661 T2 Strut Bracket (Slot Down)
AS 3029 Double Column Post Base
113 Brace Fitting - Pipe End Only
Dakota Rigid IPS Smart Clamp™
Dakota Smart-Cap™ with Threaded Receiver (12 Gauge)
AS 500, AS 500EH, AS 500S, AS 500H Channel Submittal